Daily DIY

Part 1: The Pattern

Rebuilding a spoked motorbike wheel, this involves lacing the spoke pattern and for Part 2, truing the wheel.

This particular pattern belongs to the Royal Enfield Bullet.

Before starting it’s a good idea to take photos of the wheel, recording need to know info for later, such as pattern and layout of the spokes.


By: petercd

Life sucks sometimes, and you have many choices, among them drinking, television, taking long walks at night among decayed buildings. But you know better; me too. How about spending drinking money on wood, television time on building a sailboat in a bedroom, and keeping the long walks amoung decaying buildings as a useful reminder of Mortality and the Clock?



After losing everything in a divorce except some books and some tools, and having to keep my small sailboat two hours drive away, I decided to make life better actively. You can do it too, and probably better, because I know you have more skills than I do. First, two preliminary steps:



Step A — Create a project that is somewhat unusual. Coffee tables, bookcases, etc., will not work when life sucks. Imagination and promise of adventure are stronger cures for almost anything.



Step B — Build a bench-toolbox of dimensions ~12 inches x 12 inches x 4 feet (standard lumber). The door to access tools is on the side so that you do not disturb your ass if you are sitting on the bench or the workpieces if you are working them on the bench. This is your world, this compact box will hold all the tools needed to build almost anything except the Space Shuttle. Any larger tools are merely conveniences, not really needed for your project-without-workshop. (most used tools were electric drill, electric jigsaw, hand plane (jackplane), wood chisel, wood file, Japanese crosscut saw , hammer, tapemeasure, compass-scribe, sandpaper, screwdrivers, and vacuum cleaner….you working in your living space after all!).



Add a side vise and a hold-down vise — both are the pure poetry of the third and fourth hands. Humanity has always desired more hands. The Japanese use their feet as hands when woodworking. The Eskimo (Inuit, Nunamiut) use their teeth — I use the hold-down and side vise. Write a poem about them; they will be great friends:



Steel hands on soft wood,

incorporating contradictions as they should–

how can the hard-harsh fail to dent

the soft-smooth low-friction meant

for …



OK, I have no time for good poetry now, but you get the idea. The bench is endlessly useful for people working without proper workshops. I built most of my sailing outrigger canoe (proa) in a spare bedroom of an apartment, and parts of it in my living room, and many pieces of that on this bench, where I could listen to music, eat, and meditate over the project.



If I had a one-bedroom apartment, I could have done the project in there no problem (sleep on floor on futon, roll mattress aside, cover with dust-sheet!). The wheels hardly seen at left bottom let me drag it around once I tilted it up by the handle. Lay a cheap carpet under it to protect your landlord’s property.



Get a low stool to sit on while at work. The one pictured here was once used to sit near the bathtub as I bathed my infant children. I suggest that you too have a small, useful stool, filled with beautiful memories and ready to be filled with more. But you *can* sit on it, too.




By: Wade Tarzia

(Click Image to Enlarge)

Check out this detailed building of a 5.6 c.f. 37.5 amp polygonal top-loading electric kiln:
“This set of pages diarizes the construction of my kiln. I fire to cone 6 oxydation and use an electric kiln to do so. The kiln I’ve used till now is a very old cone 1 Olympic, it […]

(Click Image to Enlarge)

Hackedgadgets writes:
“This is what I need, no need to look up drink recipes, simply select a drink from the touch screen. The pouring spout looks great with the LED lighting.
“A Bar Monkey is a machine that automatically mixes and dispenses alcoholic drinks. The original Bar Monkey v1.0 was created by Steven Avery, […]

Before I saw video #2 & #3 I thought it was fake from how it looked, but it’s real:
Hacked Gadgets Says, “If you like the game Mahjong but hate to set it up to play a game this the answer for you.
“If you are one of many Mahjong fans out there, check out this high […]

(Click Image to Enlarge)

Awesome article over at instructables:
“Zach Radding and his daughter Taylor with some robots he built using his own CNC laser cutting machines.
Check out http://www.buildcoolstuff.com/ to see more of his projects and info on the classes he teaches.
He’s built two laser cutters so far.
Click on the little numbered pictures above to learn […]